Self Adhesive Silicon Gasket, also called Self Adhesive Silicon cover & Backing Adhesive Pads, which is made of elastomeric silicone rubber materials with backed double side tapes & films by die-cutting. One of popular adhesive tape is 3M backed adhesive tape & film.
Silicone Card Holder
Silicone Card Holder, also known as Adhesive Card Sleeve, Silicone Smartphone Wallet, which are silicone rubber pocket-wallets that attach to the back of your phone or tablet. These flexible pockets securely hold up to three cards as well as some cash. Our silicone wallets come with a direct print of your logo or custom design on a 1.75” x 2” imprint area on the front of the wallet.
Putting your logo on a silicone cell phone wallet is a great way to spread your branding. Not only do people find these phone pockets useful, their imprint is prominently visible on the back of the phone. Every time your client or customer whips out their phone, your branding will be displayed for all to see.
Adhesive Card Sleeve Manufacturing Process:
1. Making Compression Mold silicone card holders first.
2. After finishing mold-making, producing adhesive card sleeve for test. If dimensions are OK, sending the whole piece of silicone products to factory for dealing with silicone glue & tapes.
If big silicone rubber products, burring firstly, and then deal with silicone glue.
If small silicone rubber parts, generally dealing with silicone glue firstly, and then choose fixture tooling ( die-cutting) to burring. Or removing the big barbs, and then deal with the silicone glue, finally fixture tooling (die-cutting) to de-burring.
3. Knowledge of Self Adhesive Backed Tape Process
a. Paste double sided silicone 3m tape with the anti-adhesive sides of anti-adhesive paper;
b. Cutting the inner round holes by cutting die;
c. Silicone products are coated with silica gel treatment agent; (Notes: silica gel treatment agent should be even/ well-distributed; and should not coat on the surface of silicone products)
d. Accurate placed stick double sides silicone 3m tape, the surface of 3m tepe should be even.
(Notes: should not be a little off; and should not have bubble.)
e. Next Die Cutting for dis-burring & remove silicone rubber flashing
f. After finishing die cutting, check if have less materials or not clear cutting.
g. Test the finished products by 3D projects and amplification instrument
h. Before packaging, check the silicone glue one by one.
Xiamen Better Silicone Rubber Co.,Ltd, which not only can make silicone rubber compression mold, plastic injection mold and LSR injection molding, but also can produce different kinds of silicone rubber & plastic components or sealing gasket with adhesive backing: