Xiamen Better Silicone Rubber Co., Ltd

Heat Shrink Boots Heat Shrink Boots also referred to as Heat Shrink Molded Shapes, Wire Harness Boots, Heat Shrink Tubing, Heat Shrink Cable Boots, which are used in a wide range of industries such as military, aerospace, automotive, and industrial. Often used in conjunction with heat shrink tubing,

Duckbill Check Valve Types & Installation and Duckbill Check Valve Design Guide——Duckbill check valve is also named rubber check valve, rubber duckbill valve, which has special structure like duckbill. It is an air, gas, liquid, water backflow preventer which has the function of forwarding flow in positive direction while non-return in opposite direction. Rubber duckbill check valve is applicable widely to drainage system, sewer, breast pump and manual respirator.

Umbrella check valve also known as umbrella valve seal, mushroom valve, which is a non return one way valve and used in air inlet & intake valve for self inflating bag, manual resuscitator, bag valve mask(BVM), manual resuscitation & ventilation bag like Ambu Bag, Laerdal resuscitator. Respirator valve & respiratory umbrella valve is made from medical grade silicone by compression molding or liquird silicone rubber LSR molding.

The Difference Between VMQ, FVMQ (Fluorine Silicone), FKM (Fluororubber), FFKM (Perfluorinated Rubber)

Umbrella Valve Seal, known as Umbrella Check Valve or Mushroom Valve, which is one type of silicone one way check valve ( backflow valve & pressure relief valve). Silicone Umbrella Valve, which have round diaphragm seals & seat for air or water pressure relief and backflow controls like Belleville v

Nasal Cannula Prongs, also named as CPAP Nasal Prongs, Oxygen Nasal Prongs, which are mainly produce by LSR injection Molding for good quality with minimum parting line and flash. Silicone Nasal Cannula is designed for easy administration of oxygen into the patient nose through two small prongs plac